Ricoh Aficio 270 - Flow Chart

FAX UNIT
A265/A267 3-2 SM
3.1.2 FLOW CHART
Before installing the fax unit and/or fax options, refer to the following flow chart.
Install the printer unit.
* Refer to the optional printer's
service manual
START
Yes
No
END
Will you be installing
the optional printer
unit?
Will you be installing
both the SG3 and G4
units?
Remove the G4 board from the G4 unit
and attach it to the SG3 unit.
(3.1.2 G3 INTERFACE)
* This procedure is necessary, as it
is physically impossible to install both units.
Install the SG3/G4 unit
(SG3 Unit with G4 board
attached).
(3.1.2 G3 INTERFACE)
Will you be
installing the handset?
* USA model only
Install the handset.
(3.1.7 HANDSET)
Will you be installing
the SG3 unit?
Will you be installing
the G4 unit?
Install the SG3 unit.
(3.1.2 G3 INTERFACE)
Install the G4 unit.
(3.1.3 ISDN OPTION)
Yes
No
Yes
No
Yes
No
Yes
No
Will you be
installing the EXMEM
BOARD and/or FAX
FUNCTION?
Install the EXEM BOARD
and/or FAX FUNCTION.
(3.1.6 EXMEM BOARD,
3.1.5 FAX FUNCTION)
Yes
No
Reassemble the operation panel
and affix decals.
(3.1.1 FAX OPTION)
Install the FCU.
(3.1.1 FAX OPTION)
Remove the NCU board
form the NCU unit
contained in the FAX
unit and attach it to the
SG3/G4 unit.
(3.1.2 G3 INTERFACE)
Install the NCU unit
(contained in the fax
unit).
(3.1.1 FAX OPTION)
A
A
Will you be
installing the PC-FAX
EXPANDER?
Install the PC-FAX
EXPANDER.
(3.1.4 PC-FAX EXPANDER)
Yes
No