SCANNER UNIT
A265/A267 6-6 SM
6.1.6 SCANNER MOTOR
1. Remove the connector cover [A], disconnect the cable, and remove the rear
cover [B].
2. Remove the exposure glass. (See Exposure Glass.)
3. Remove the lens block. (See Lens Block Assembly.)
4. Replace the scanner motor [C] (2 screws, 1 spring, 1 connector).
5. Reassemble the machine and do the scanner and printer copy adjustments.
(See Copy Adjustments, section 6.8).
A267R515.WMF
A267R007.WMF
A267R014.WMF
[A]
[B]
[C]
To Next Page
Loading...
