Ricoh Aficio 270 - Scanning and Printing

VIDEO DATA PATH
SM 1-13 A265/A267
Overall
Information
A895
1.4.4 SCANNING AND PRINTING
SCANNING
The machine scans an original into page memory, then transfers the data to the
host PC. The data is sent to the application through the CFM Twain driver.
NOTE:
The maximum resolution is 200 x 200 dpi.
PRINTING
The machine receives print data into SAF memory as fax image data, then prints it
after all the data has been transferred from the host PC.
The destination number “0000” informed from the host PC identifies a print job.
NOTE:
1) If SAF memory runs out while receiving print data, the machine prints up
to the successfully received data.
2) The machine cannot receive print data while printing a message from
the SAF memory. The data will be received after printing.
3) If a fax destination is specified together with the print destination “0000”,
the destinations specified after “0000” will be delayed until the machine
prints all pages in the message.
FCU
IBM Compatible
DCRDIU
Scanner
Page Memory
Serial Port
Twain Driver
Application
A895V507.WMF
FCU
IBM Compatible
DCRDIU SAF
Page Memory
Printer Engine
A895V508.WMF