SCANNING FEATURES
SM 2-7 A265/A256
Detailed
Descriptions
A895
2.2.3 CREATE MARGIN TRANSMISSION
When this function is enabled, the scanner is able to reduce the image of the
original. This allows the person at the other end to file the printout without losing
any of the data to punch holes.
The machine adds a margin to the bottom and left borders of the image so that the
transmitted page is the same size as the original.
Cross reference
•
Reduction ratio - System switch 06 bit 0 to 7
Default setting is 93% (71 to 99%)
NOTE:
1) This function is only possible during memory transmission.
2) “Create margin transmission” and “Image rotation before transmission”
are not compatible. (Create margin transmission is given priority)
3) The sample image on reports is also reduced and contains the margin.
4) Both the main and sub scan directions use the same magnification ratio.
R
To Next Page
Loading...
