SCANNER UNIT
A265/A267 6-4 SM
6.1.4 ORIGINAL SIZE SENSORS/LAMP STABILIZER
1. Remove the exposure glass. (See Exposure Glass.)
2. Remove the lens cover. (See Lens Block.)
3. Remove the lamp stabilizer [A] (2 connectors).
4. Remove the original width sensor [B] (1 screw, 1 connector).
5. Remove the lens block. (See Lens Block Assembly.)
6. Remove the original length sensors [C] (1 screw, 1 connector each).
A267R005.WMF
A267R004.WMF
[A]
[B]
To Next Page
Loading...
