Ricoh Aficio 270 - 1-Bin Tray Unit Installation; Component Check; Installation Procedure

1-BIN TRAY UNIT INSTALLATION
SM 3-23 A265/A267
Installation
3.7 1-BIN TRAY UNIT INSTALLATION
3.7.1 COMPONENT CHECK
Check the quantity and condition of the components against the following list.
No. Description Q’ty
1 1-Bin Tray Unit 1
2Tray 1
3 Sub-Tray 1
4Tray Guide 1
5 Paper Guide 1
6 Tapping Screw M3x8 1
3.7.2 INSTALLATION PROCEDURE
!
CAUTION
Unplug the copier power cord before starting the following procedure.
NOTE: Before installing this 1-bin tray unit, the optional interchange unit
(B300) must be installed.
1. Remove all tapes.
2. If the optional bridge unit (A897) has been installed, open the right jam removal
cover [A] of the bridge unit.
If the optional bridge unit is not installed, skip this step.
A898I101.WMF
A898I501.WMF
[A]
1
2
3
4
5
6