BRIDGE UNIT DRIVE MOTOR REPLACEMENT
SM 15-7 A265/A267
Bridge Unit
A897
3. REPLACEMENT AND ADJUSTMENT
NOTE:
When taking apart the bridge unit, first take the unit out of the copier.
3.1 BRIDGE UNIT DRIVE MOTOR REPLACEMENT
1. Remove the bridge unit from the copier. (See the Installation Procedure in the
base copier manual.)
2. Remove the rear cover [C] (2 screws).
3. Remove the bridge unit drive motor [D] (2 screws, 1 connector).
A897R103.WMF
[D]
[C]
To Next Page
Loading...
