PCBS AND OTHER ITEMS
SM 6-31 A265/A267
Replacement
Adjustment
6.7 PCBS AND OTHER ITEMS
6.7.1 BICU BOARD
1. Remove the rear cover. (See Paper Tray Lift Motors.)
2. Remove the optional finisher if it has been installed.
3. Remove the application cover [A] (1 screw).
4. Remove the expansion box if the fax, printer, or scanner option units have been
installed.
5. Remove the optional copier memory if it has been installed.
6. Remove the BICU board [B] (6 connectors, 6 screws or 5 screws if the optional
copier memory has been installed).
7. Remove the NVRAM [C] from the old BICU board and put it on the new BICU
board.
A267R517.WMF
A267R516.WMF
[C]
[B]
[A]
To Next Page
Loading...
