FUSING/EXIT
SM 6-17 A265/A267
Replacement
Adjustment
6.5 FUSING/EXIT
6.5.1 FUSING UNIT
!
CAUTION
Allow time for the unit to cool before doing the following procedure.
1. Release the duplex unit, if it has been installed, and open the right cover.
2. Remove the fusing unit [A] (2 screws).
6.5.2 THERMISTOR
1. Remove the fusing unit. (See Fusing Unit).
2. Replace the thermistor [A] (1 screw, 1 connector).
A267R501.WMF
A267R502.WMF
[A]
[A]
To Next Page
Loading...
