Ricoh Aficio 270 - Dedicated Transmission Parameters

ISDN Unit
A895
DEDICATED TRANSMISSION PARAMETERS
SM 2-15 A265/A267
2.3 DEDICATED TRANSMISSION PARAMETERS
The following G4 communication parameter bytes have been added for each Quick
Dial and Speed Dial. For how to program Dedicated Transmission Parameters,
refer to the Service Manual for the base fax unit.
Switches 01 to 04 are for use with Group 3 communication and are explained in
the Service Manual for the base fax unit. Switches 5, 6, and 10 are not used.
Switch 07
No. FUNCTION
0
1
2
3
Data rate Bit 3 2 1 0 Setting
0 0 0 0 64 kbps
0 0 0 1 56 kbps
1 1 1 1 As in Parameter Switch 2, bits 0 and 1
Other settings: Not used
4-7
Not used
Switch 08
No. FUNCTION
0
1
2
3
Link modulus Bit 3 2 1 0 Setting
0000Modulo 8
0 0 0 1 Modulo 128
1 1 1 1 As in Parameter Switch 3, bit 0
Other settings: Not used
4-7
Not used
Switch 09
No. FUNCTION
0
1
2
3
Layer 3 protocol Bit 3 2 1 0 Setting
0000IS8208
0001T.70 NULL
1 1 1 1 As in Parameter Switch 6, bit 0
Other settings: Not used
4
5
6
7
Packet modulus Bit 7 6 5 4 Setting
0000Modulo 8
0 0 0 1 Modulo 128
1 1 1 1 As in Parameter Switch 6, bit 4
Other settings: Not used