1000-Sheet
Finisher
A681
ROM HISTORY
SM 17-25 A265/A267
4.7 ROM HISTORY
A681 Firmware Modification History (1000 Sheet Finisher)
Description of Modification Level Prod. Date Ver.
Corrects the following:
•
Paper jams due to an error in the vertical
movement of the tray.
A6815103K NA K
Corrects the following:
•
Jams that occur when the door is opened
during a staple job.
•
After the power is turned on, the copier
reaches ready status even though the shift
tray lower limit sensor is on (and the stack is
full). A jam occurs if a copy job is started.
A6815103J NA J
Corrects the following:
•
The mainframe locks up during jam recovery.
The frequency of occurrence is extremely low.
•
The user cancels the staple job when there is
only one sheet in the staple tray and the sheet
is automatically removed from the tray. A
paper jam occurs when the next sheet is fed
for stapling.
A6815103H NA H
Corrects the following:
•
The jam detection timing has been changed so
the A681 can also be used with the A265,
A267 or G038. This change has no effect on
the A232 series.
A6815103G NA G
Corrects the following:
•
Stapled paper did not stack straight.
A6815103F NA F
Corrects the following:
•
Paper rolling on the shift tray.
A6815103E NA E
Rev. 03/2000
⇒
To Next Page
Loading...
