Ricoh Aficio 270 - Page 201

SERVICE PROGRAM MODE
SM 4-15 A265/A267
Service
Tables
Mode No.
Class
1 and 2
Class
3
Function Settings
Adjusts the upper paper lift motor forward
rotation time for paper sizes larger than the
small size threshold set with SP1-911-8, up
to and including the middle size threshold
set with SP1-911-9.
The motor rotates forward when the
remaining paper amount is lower than the
value of SP1-911-7.
If a middle size threshold is not stored with
SP1-911-9, this SP is not used.
5
4th Bottom Plate
Pressure
Re-adjustment
(Middle Size)
(Optional PFU)
Use this SP when a paper feed problem
occurs when paper in the 4th paper tray is
running low.
See “Optional Paper Tray Unit - Paper Lift
Mechanism” for details on SP1-911, Section
10.2.2.2.
0 ~ 2000
1 ms/step
300 ms
Selects the remaining paper amount limit for
use with SP1-911-4.
6
4th Paper Amount
(Small Size)
(Optional PFU)
Set this SP to 2 or 3 when a paper feed
problem occurs before near-end.
See “Optional Paper Tray Unit - Paper Lift
Mechanism” for details on SP1-911, Section
10.2.2.2.
0: None
(Empty)
1: Near End
2: 25%
3: 75%
Selects the remaining paper amount limit for
use with SP1-911-5.
7
4th Paper Amount
(Middle Size)
(Optional PFU)
Set this SP to 2 or 3 when a paper feed
problem occurs before near-end.
See “Optional Paper Tray Unit - Paper Lift
Mechanism” for details on SP1-911, Section
10.2.2.2.
0: None
(Empty)
1: Near End
2: 25%
3: 75%
Selects the small size threshold for the 4th
paper tray.
“0” means that this setting is not used.
8
4th Small Paper
Size Setting
(Optional PFU)
The size used by SP1-911 is determined by
paper width. See “Optional Paper Tray Unit -
Paper Lift Mechanism” for details on SP1-91,
Section 10.2.2.21.
0: None
(Not used)
1: HL
2: A4
3: LG, LT
4: DL, L.
5: A3, 4
Selects the middle size threshold for the upper
tray.
“0” means that this setting is not used.
1-911*
9
4th Middle Paper
Size Setting
(Optional PFU)
The value must be larger than the small size
threshold (SP1-911-8). The size used by SP1-
911 is determined by paper width. See “Optional
Paper Tray Unit - Paper Lift Mechanism” for
details on SP1-911, Section 10.2.2.2.
0: None
(Not used)
1: HL
2: A4
3: LG, LT
4: DL,L
5: A3,4
Adjusts the tray motor reverse time.
1-912*
Tray Motor Reverse
Time
The tray motor reverses when the tray is pulled
out. The tray can be put back in the machine
without damage while the motor reverses.
0 ~ 9000
1 ms/step
1700 ms
Adjusts the duplex inverter motor speed during
forward rotation at low speed.
1-920* 1
Duplex Inverter
Motor Speed
Adjustment
(Forward/Low)
Use this SP when paper often jams at the duplex
entrance area. Do not use in the field unless
directed by service center staff.
-4 ~ 4
1/step
0