Ricoh Aficio 270 - Page 204

SERVICE PROGRAM MODE
A265/A267 4-18 SM
Mode No.
Class
1 and 2
Class
3
Function Settings
Adjusts the trailing edge erase margin on
the reverse side of duplex copies.
The actual trailing edge erase margin on the
reverse side is this value plus the value of
SP2-101-2 or 3 or 4.
7
Erase Margin
Adjustment
(Rear – Trailing
Edge)
The specification is 3
±
2 mm. See
“Replacement and Adjustment - Copy
Adjustment” for details, Section 6.8
0.0 ~ 9.0
0.1 mm/step
1.2 mm
Adjusts the left side erase margin on the
reverse side of duplex copies.
The actual left side erase margin on the
reverse side is this value plus the value of
SP2-101-5.
8
Erase Margin
Adjustment
(Rear – Left Side)
The specification is 2
±
1.5 mm. See
“Replacement and Adjustment - Copy
Adjustment” for details, Section 6.8.
0.0 ~ 9.0
0.1 mm/step
0.3 mm
Adjusts the right side erase margin on the
reverse side of duplex copies.
The actual right side erase margin on the
reverse side is this value plus the value of
SP2-101-6
9
Erase Margin
Adjustment
(Rear – Right Side)
The specification is 2 +2.5/-1.5 mm. See
“Replacement and Adjustment - Copy
Adjustment” for details, Section 6.8.
0.0 ~ 9.0
0.1 mm/step
0.3 mm
In printer mode, adjusts the trailing edge
erase margin on the reverse side of duplex
copies.
The actual trailing edge erase margin on the
reverse side is this value plus the value of
SP2-101-7.
2-101*
10
Erase Margin
Adjustment
(Printer, Rear
Trailing Edge)
The specification is 3
±
2 mm. See
“Replacement and Adjustment - Copy
Adjustment” for details, Section 6.8.
0.0 ~ 9.0
0.1 mm/step
0.0 mm
Adjusts the LD power.
2-103*
LD Power
Adjustment
Do not change the value.
0 ~ 255
1 /step
129
Adjusts the image density level for black
pixels on test pattern printouts (patterns are
made with SP5-902).
2-106*
ID Adjustment for
Test Pattern
This SP affects all test patterns except for
the grayscale test patterns.
0 ~ 255
1 /step
255
Adjusts the development bias during
printing.
2-201* 1
Development Bias
Adjustment
(Printing)
This can be adjusted as a temporary
measure if faint copies appear due to an
aging drum.
-1500 ~ -
2000
1 V/step
–600 V