Ricoh Aficio 270 - Page 249

SERVICE PROGRAM MODE
SM 4-63 A265/A267
Service
Tables
Reading
Number Description
00H 01H
48
Side fence open sensor
(Optional LCT)
Not detected Detected
49
Left tray paper end sensor
(Optional LCT)
Paper not detected Paper detected
50 Tray set switch(Optional LCT) Off On
51
Paper sensor
(Optional 1 Bin tray)
Paper not detected Paper detected
52 Not used
53
PCU set signal (a shorted connection
in the ID sensor cable)
Not set Set
54 New PCU detect switch Used PCU New PCU
55
Paper tray unit type
(Optional paper tray unit)
See Table 4
56 Paper tray unit installed Not installed Installed
57 1-bin sorter installed Not installed Installed
58 BICU installed Not installed Installed
59 Bridge unit installed Not installed Installed
60 Shift tray unit installed Not installed Installed
61 By-pass tray installed Not installed Installed
62 Duplex unit installed Not installed Installed
63 Fusing unit installed Not installed Installed
64 Interchange unit installed Not installed Installed
65 Finisher installed Not installed Installed
66 Not used
67
1st paper lift sensor
Paper not at
correct height
Paper at correct
height
68
2nd paper lift sensor Paper not at
correct height
Paper at correct
height
69
Lower paper lift sensor
(Optional paper tray unit)
Paper not at
correct height
Paper at correct
height
70 Not used
71 Main motor lock Off On
72 Polygonal mirror motor lock Off On
73
Tray motor lock
(Optional paper tray unit)
Off On
74 Exhaust fan motor lock Off On
76 Total (mechanical) counter installed Not installed Installed
77 Not used
78
Key counter installed
(Optional key counter)
Not installed Installed
79 ~ 80 Not used
81 Laser synchronization signal Not detected Detected
82 LD error No error Error
83 ~ 89 Not used
90 DF position sensor (Optional ADF) Closed Opened