Ricoh Aficio 270 - Page 334

SERVICE CALL CONDITIONS
A265/A267 7-12 SM
SC725: Finisher stack feed-out motor error
- Definition - [B’]
The stack feed-out belt H.P sensor does not activate within a certain time after
the stack feed-out motor turned on.
- Possible causes -
•
Stack feed-out H.P sensor defective
•
Stack feed-out motor defective
SC726: Finisher shift motor error
- Definition - [B’]
Tray shift does not finish within a certain time after the shift motor turned on.
- Possible causes -
•
Shift motor defective
•
Shift tray half-turn sensor defective
SC730: Finisher stapler position motor error
- Definition - [B’]
1) The stapler does not return to its home position within a certain time after the
stapler motor turned on.
2) The stapler H.P sensor does not activate within a certain time after the stapler
motor turned on.
- Possible causes -
•
Stapler motor defective
•
Stapler H.P sensor defective
•
Poor stapler motor connection
SC733: Finisher stack feed-out motor error
- Definition - [B’]
The stack feed-out belt H.P sensor does not activate within a certain time after
the stack feed-out motor turned on.
- Possible causes -
•
Stack feed-out H.P sensor defective
•
Stack feed-out motor defective