Ricoh Aficio 270 - Page 588

OPTIONAL UNITS
SM 3-9 A265/A267
Installation
A895
6. Attach the G3 unit [A] to the machine (6 screws, 1 connector).
7. Connect cable [B] to the interface board and attach bracket [C] (1 screw). Then
attach the NCU [D] (removed from the NCU unit in step 3) to the G3 unit (4
screws).
8. Connect cable [E] to the NCU [D], then clamp cable [E] as shown.
A895I354.WMF
A895I392.WMF
[A]
[B]
[D]
[E]
[C]