BIT SWITCHES
SM 4-37 A265/A267
Service
Tables
A895
Relationship between available paper sizes and printer width used in the
setup protocol
Available Paper Size Printer width used in the Protocol (NSF/DIS)
A4 or 8.5" x 11" 297 mm width
B5 256 mm width
A5 or 8.5" x 5.5" 216 mm width
No paper available (Paper end) 216 mm width
Printer Switch 02
No FUNCTION COMMENTS
0 1st paper feed station usage
for fax printing
0: Enabled
1: Disabled
1
2nd paper feed station usage
for fax printing
0: Enabled
1: Disabled
2
3rd paper feed station usage
for fax printing
0: Enabled
1: Disabled
3
4th paper feed station usage
for fax printing
0: Enabled
1: Disabled
4
LCT usage for fax printing
0: Enabled
1: Disabled
0: The paper feed station can be used to print fax
messages and reports.
1: The specified paper feed station will not be
used for printing fax messages and reports.
Note: Do not disable usage for a paper feed
station which has been specified by User
Parameter Switch 0F (15), or which is used for
the Specified Cassette Selection feature.
5-7
Not used Do not change the settings.
Printer Switch 03
No FUNCTION COMMENTS
0
Length reduction of received
data
0: Disabled
1: Enabled
0: Incoming pages are printed without length
reduction.
(Page separation threshold: Printer Switch 03,
bits 4 to 7)
1: Incoming page length is reduced when printing.
(Maximum reducible length: Printer Switches 04,
bits 0 to 4)
Page separation and data reduction: Section 2
1-3
Not used Do not change the settings
To Next Page
Loading...
