SERVICE RAM ADDRESSES
SM 4-87 A265/A267
Service
Tables
A895
6800CE(H) - User parameter switch 14 (SWUSR_0E)
Bit 0: Message printout while the machine is in Night Timer mode 0: On, 1: Off
Bit 1: Maximum document length detection
0: Double letter, 1: Longer than double-letter (well log) – up to 1,200 mm
Bit 2: Batch transmission 0: Off, 1: On
Bit 3: Fax mode settings, such as resolution, before a mode key (Copy/Fax/Printer
/Scanner) is pressed
0: Not cleared, 1: Cleared
Bits 4 to 6: Not used
Bit 7: Manual service call (sends the system parameter list to the service station)
0: Off, 1: On
6800CF(H) - User parameter switch 15 (SWUSR_0F)
Bits 0, 1 and 2: Cassette for fax printout
Bit 2 1 0 Setting
0 0 1 1st paper feed station
0 1 0 2nd paper feed station
0 1 1 3rd paper feed station
1 0 0 4th paper feed station
1 0 1 LCT
Other settings Not used
Bits 3 and 4: Not used
Bit 5: Using the cassette specified by bits 0, 1 and 2 above only 0: On, 1: Off
Bits 6 and 7: Not used
6800D0(H) – User parameter switch 16 (SWUSR_10)
(This switch is not printed on the user parameter list.)
Bits 0 and 1: Not used
Bit 2: Paper size selection priority for an A4 size fax message when A4/LT size
paper is not available.
0: A3 has priority, 1: B4 has priority
Bits 3 to 7: Not used
6800D1(H) – User parameter switch 17 (SWUSR_11)
Bits 0 and 1: Not used
Bit 2: Inclusion of the “Add” button when a sequence of Quick/Speed dials is
selected for broadcasting
0:Not needed, 1: Needed
Bits 3 to 7: Not used
6800D2(H) - User parameter switch 18 (SWUSR_12)
Bit 0: TTI date 0: Off, 1: On
Bit 1: TTI sender 0: Off, 1: On
Bit 2: TTI file number 0: Off, 1: On
Bit 3: TTI page number 0: Off, 1: On
Bit 4 to 7: Not used
To Next Page
Loading...
