SERVICE RAM ADDRESSES
SM 4-89 A265/A267
Service
Tables
A895
6800D4(H) - User parameter switch 20 (SWUSR_14)
Bit 0: PC transmission mode
0: Direct Tx, 1: Memory Tx
Bit 1: Addition of fax TTI during PC memory transmission
0: Disabled, 1: Enabled
Bit 2: Checkered mark on printouts during PC printing
0: Disabled, 1: Enabled
Bit 3: Not used
Bit 4: Line type selection for PC transmission (memory or direct)
0: PSTN-1, PSTN-2
Bit 5: Communication port for PC memory transmission
(This switch is not printed on the user parameter list.)
0: PSTN (the line used depends on bit 4), 1: ISDN G4
Bits 6 and 7: Buffer threshold for PC direct transmission
Keep this bit at “0,0” in most cases.
(This switch is not printed on the user parameter list.)
Bit 7 Bit 6 setting
0 0 Minimum (default)
0 1 :
1 0 :
1 1 Maximum
To Next Page
Loading...
