Ricoh Aficio 270 - Page 694

SERVICE RAM ADDRESSES
SM 4-95 A265/A267
Service
Tables
A895
Example 3:
SC code “330 to 339”
Address (High) – 03 (BCD)
Address (Low) – 3a or 3A (Hex)
- Default settings -
High Address (H) Data (BCD) Low Address (L) Data (BCD) SC code
680DC8 01 680DC9 92 192
680DCA 09 680DCB 80 980
680DCC 09 680DCD 99 999
680DCE
to
680DEE
FF(H)
680DCF
to
680DEF
FF(H)
Not Programmed
68849C to 688B9B(H)
- Dedicated tx parameters for Quick Dial 01 - 56.
There are 32 bytes for each Quick Dial. Only the 23rd to 32nd bytes are used.
6884B2 to 6884BB(H) - Dedicated tx parameters for Quick 01
6884D2 to 6884DB(H) - Dedicated tx parameters for Quick 02
6884F2 to 6884FB(H) - Dedicated tx parameters for Quick 03
688B92 to 688B9B(H) - Dedicated tx parameters for Quick 56
688B9C to 68981B(H)
- Dedicated tx parameters for Speed Dial #00 - #99.
There are 32 bytes for each Speed Dial. Only the 23rd to 32nd bytes are used.
688BB2 to 688BBB(H) - Dedicated tx parameters for Speed #00
688BD2 to 688BDB(H) - Dedicated tx parameters for Speed #01
688BF2 to 688BFB(H) - Dedicated tx parameters for Speed #02
689812 to 68981B(H) - Dedicated tx parameters for Speed #99
68E8E4 to 68E8E5(H)
- Line type change (refer to section 2 for more details)
68E8E4(H) - Current line type setting
68E8E5(H) - New line type settings