FCU
A265/A267 6-6 SM
9. Press either of the following:
"
– Standard SRAM only
$
– Standard SRAM and SRAM on the
EXFUNC.
10. Press “S” then
'
; a confirmation
message appears.
11. Press
%
to restore the SRAM.
If data has been restored successfully, the
message on the right appears.
12. Turn off the main power switch then disconnect the card.
13. Turn the machine back on.
14. Print the system parameter list to check if the previous settings have been
successfully recovered.
A895R520.BMP
A895R521.BMP
A895R522.BMP
A895R523.BMP
To Next Page
Loading...
