Ricoh bk5010 - Thick Set Sensor Q36

Replacement
Adjustment
21 August 2006
3-43
AREA A
3.4.21 THICK SET SENSOR Q36
Removal
1. Remove the outermost stapler head [A] (
3.4.12 ).
2. Remove nut [B] (
x1 ).
NOTE: In order to maintain distance [C], do not loosen screws [D] or [E].
3. Disconnect connector [F] (
x1 ).
[A]
[B]
[F]
[D]
Continued on next page....
[E]
[C]
View from infeed
View from outfeed