5-27
Service
Tables
21 August 2006
BF SERVICE
5.6 BF SERVICE
In the Book Folder Service menu, you are able to set up the Book folder to Adjust-
ment mode. Use the Adjustment mode when adjusting the Square folding quality.
When the Adjustment mode is set to ON, the Home position of the Stop gate is
changed. So you will be able to adjust the Stop gate during run.
Adjustment mode
Set the Adjustment mode to ON when performing Stop gate adjustment A
( BF5010 Service Manual 3.5.2).
NOTE: When you are done with the adjustment, remember to set the Adjust-
ment mode to OFF.
1. Enter the Service Program mode.
2. Go to BF5010 Service. Press the OK button.
3. Scroll to Adjust mode: Press the CHG button, so it says ON in the UI.
4. Press the OK button.
To Next Page
Loading...
