Ricoh bk5010 - Page 137

Replacement
Adjustment
21 August 2006
Replacement
Adjustment
3-51
AREA C
Removal Sensor Q11
1. Remove Rear cover (
3.3.1 ).
2. Remove Infeed cover (
3.3.2 ).
3. Disconnect connector [A] (
x1 ).
4. Remove sensor Q11 [B].
Replacement Sensor Q11
1. Reverse the removal procedure.
Lubricate Length transmission shaft
1. Remove Rear cover (
3.3.1 ).
2. Remove Infeed cover (
3.3.2 ).
3. Lubricate with grease on the Length transmission shaft [C], and the nut to the
Length transmission shaft.
NOTE: You should be able to turn the length adjustment shaft by hand.