Ricoh TH-C1b - Oil Supply Pad; Cleaning Roller and Fusing Sponge Roller

FUSING/PAPER EXIT 10 February 2005
3-30
3.8.3 OIL SUPPLY PAD
CAUTION: Empty silicone oil out of the oil supply unit into a vessel or container
before beginning the following steps.
1. Oil supply unit [A] ( 3.8.2)
2. Springs [B] x 2
3. Cleaning roller assembly [C]
( x 1, Shoulder screw x 1)
4. Stay [D] ( x 1)
5. Slide the pad [E] and pull it out.
NOTE: If you cannot put the springs in the
places, remove the cleaning roller
( 3.8.4).
3.8.4 CLEANING ROLLER AND FUSING SPONGE ROLLER
1. Oil supply unit ( 3.8.2)
2. Cleaning roller [A] (Bushing x 2,  x
2)
3. Fusing sponge roller [B] (Bushing x
2,  x 2, Spring x 2)
B156R259.WMF
B156R260.WMF
[A]
[B]
[C]
[D]
[E]
[A]
[B]