Ricoh TH-C1b - Installation Procedure

10 February 2005 500-SHEET FINISHER (B458)
1-47
Installation
1.13.2 INSTALLATION PROCEDURE
!CAUTION
Unplug the main machine power cord before starting the following
procedure.
NOTE: Before installing the 500-sheet finisher, the optional bridge unit (B482)
must be installed.
1. Unpack the finisher and remove the tapes.
2. Install the entrance guide [A].
3. Remove the holder cover [B]. Then install the unit holder [C] (2 screws).
4. Re-install the holder cover [B].
B458I101.WMF
B458I103.WMF
[A]
[B]
[C]