10 February 2005 PRINTER OPTIONS
1-51
Installation
1.15.2 FILE FORMAT CONVERTER (B609)
!CAUTION
Disconnect the main machine’s power cord before you start this procedure.
1. Remove the slot cover [A] from I/F Card Slot A (! x 2).
2. Install the file-format-converter board [B] (Knob-screw x 2).
NOTE: Use a screwdriver when you tighten the knob-screws. Do not tighten
them manually. It can cause this board to disconnect from the machine.
B609I001.WMF
[A]
[B]
To Next Page
Loading...
