SERVICE PROGRAM MODE 10 February, 2005
5-6
1
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
Paper Buckle
1 Tray: Plain Adjusts the amount of paper buckle at the registration
roller by changing the paper feed timing.
[–4 ~ 6 / 0 / 1 mm/step]
2 Tray: Thick [–4 ~ 6 / –2 / 1 mm/step]
003*
3 Tray: OHP [–4 ~ 6 / –2 / 1 mm/step]
4 Tray: Small Size [–4 ~ 6 / 0 / 1 mm/step]
Small Size includes LT long edge feed and smaller.
5 By-pass: Plain [–4 ~ 6 / 3 / 1 mm/step]
6 By-pass: Thick [–4 ~ 6 / 0 / 1 mm/step]
7 By-pass: OHP [–4 ~ 6 / 0 / 1 mm/step]
003*
8 Duplex [–4 ~ 6 / 0 / 1 mm/step]
Fusing Temperature
1 Heating: Idling Sets the temperature at which the heating roller starts
idling.
[100 ~ 180 / 145 / 1°C/step]
2 Heating: Ready Sets the temperature at which the heating roller enters
the print ready condition.
[100 ~ 180 / 155 / 1°C/step]
3 Heating: Standby Sets the heating roller temperature for the ready
(standby) condition. After the main switch has been
turned on, the machine enters this condition when the
heating roller temperature reaches the temperature
specified in this SP mode. When the machine is
recovering from energy saver or auto off mode, the
machine becomes ready when both heat and pressure
roller temperatures reach the specified temperature.
Pressure roller: SP1-105-16
[100 ~ 180 / 160 / 1°C/step ]
4 Heating: Plain/1 Color Sets the heating roller temperature for thin paper in
single-color mode.
[120 ~ 190 / 155 / 1°C/step]
5 Heating: Plain/Full
Color
Sets the heating roller temperature for thin paper in full-
color mode.
[120 ~ 190 / 160 / 1°C/step]
6 Heating: Middle
Thick/1 Color
Sets the heating roller temperature for normal plain
paper in single-color mode.
[120 ~ 190 / 165 / 1°C/step]
7 Heating: Middle
Thick/Full Color
Sets the heating roller temperature for normal plain
paper in full-color mode.
[120 ~ 190 / 170 / 1°C/step]
8 Heating: Thick/1 Color Sets the heating roller temperature for thick paper in
single-color mode.
[120 ~ 190 / 165 / 1°C/step]
9 Heating: Thick/Full
Color
Sets the heating roller temperature for thick paper in full-
color mode.
[120 ~ 190 / 170 / 1°C/step]
105*
10 Heating: OHP/1 Color Sets the heating roller temperature for OHP sheets in
single-color mode.
[120 ~ 190 / 165 / 1°C/step]
To Next Page
