Ricoh TH-C1b - Page 79

10 February 2005 ANTI-CONDENSATION HEATER
1-67
Installation
7. Remove the rear scale [A] (! x 3), left scale [B] (! x 2), and exposure glass
[C].
NOTE: When installing the exposure glass, make sure that the mark [D] is
positioned at the rear left corner, as shown.
8. Install the anti-condensation heater [E] (! x 2, " x 1).
9. Reinstall the exposure glass and the scales.
B156I528.WMF
B156I529.WMF
[A]
[B]
[C]
[D]
[E]