RKC INSTRUMENT PF900 - Page 157

6. PROGRAM CONTROL
IMR02L04-E3
6-29
6.11.3 Setting procedure
 How to conduct Pattern copy
[Example: Copy the data of Pattern 1 to Pattern 2.]
The next parameter displays instead of YES/NO display when the same value or “0” is set to the
numbers of Copy source and Copy destination.
 How to conduct Data clear
To conduct Data clear, set “9999.”
Tip: It is easier to set “10000” first and press the

key to reduce the number by 1 rather than setting “9”
to each place.
PV
L COPY
M:S SV
FIX00000‹00
Pattern copy
Copy destination
number


PV
L COPY
M:S SV
FIX00000‹0 0
PV
L COPY
M:S SV
FIX00001‹0 0
Set “1.”
PV
L COPY
M:S SV
FIX00001‹00
Copy destination number
flashes.
Copy source number flashes.

Press twice
PV
L COPY
M:S SV
FIX00001‹02
Set “2.”

PV
L COPY
M:S SV
01‹02001‹No
“NO” displays.
Press the  key to
switch to YES.

PV
L COPY
M:S SV
01‹02001YES
“YES” displays.
Copy is available
Press the  key to
conduct Pattern copy.
Setting end
Copy source
numbe
r
PV
L0CLR
M:S SV
FIX00000000
Data clea
r
Flash 10 thousands place.
PV
L0CLR
M:S SV
FIX00000000
PV
L0CLR
M:S SV
FIX00010000
Set “1.”
Several
times
PV
L0CLR
M:S SV
FIX00010000
Flash one place.

PV
L0CLR
M:S SV
FIX00009999
“NO” displays.
Press the  key to
switch to YES.
PV
L0CLR
M:S SV
FIX000000NO
“YES” displays.
Data clear is available.
PV
L0CLR
M:S SV
FIX00000YES
Setting end
Press the
 key to
conduct Data clear.






Display “9999”