RKC INSTRUMENT PF900 User Manual

4. BASIC OPERATION
IMR02L04-E3
4-15
 Parameter switching
 Press and hold the

key for 2 seconds or more at PV/SV monitor screen until Operation mode is
displayed.
 Press the

key to switch operation screen.
It is possible to switch displays by using the

key instead of the

key.
Press the

key to go back to the PV/SV monitor.
Press the STEP R.SET key to go back to the previous display.
Press the STEP R.SET key while pressing the

key to go back to the Operation mode transfer
display.
Display returns to the PV/SV monitor if no key operation is performed within 1 minute.
Parameters will not be displayed if the relevant function is not activated or no relevant specification
is selected when ordering.
For setting procedure of each function, refer to 6. FUNCTION AND SETTING PROCEDURE of
the PF900/PF901 Instruction Manual (IMR02L03-E) on the CD-ROM.
PV/SV monitor
PV
00028 $
M:S SV
5 30:00000200
Press and hold the

key
for 2 seconds or more.

PV
0 MODE
M:S SV
FIX000RPROG
Operation mode
transfer
PV
0 STEP
M:S SV
FIX000REOFF
Step function
 
PV
SARCH
M:S SV
FIX000REOFF
Search function
PV
0SATU
M:S SV
FIX000REPID
PID/AT transfer


PV
0SATT
M:S SV
FIX000REOFF
Autotuning (AT)
with learning function


PV
S0ILR
M:S SV
FIX000REOFF
Interlock release

PV
S LOCK
M:S SV
FIX000REOFF
Set data lock
Select by using
the

key or
the

key.

RKC INSTRUMENT PF900 Specifications

General

Brand	RKC INSTRUMENT
Model	PF900
Category	Controller
Language	English