RKC INSTRUMENT PF900 - Setting Item Selection

4. BASIC OPERATION
IMR02L04-E3
4-5
 Setting item selection
 Press the

key or the

key to switch setting item.
 Press the

key or the

key to store the set values being set and go to the next parameter setting
display.
Example 1: Switch operation mode from the Program control mode to the Fixed set point control mode.
Example 2: Conduct Autotuning (AT).
Example 3: Change communication speed 1 in the Setup setting mode.
PV/SV monitor
PV
00028 $
M:S SV
5 30:00000200
2 seconds or more
PV
0 MODE
M:S SV
FIX000RPROG
Operation mode
transfer
PV
0 MODE
M:S SV
FIX000REFIX



Program control mode
Displays the character
“FIX” for the Fixed set
point control mode.
Switch to the Fixed
set point control
mode.
The display goes to
the next parameter.
PV/SV monitor
PV
00028 $
M:S SV
5 30:00000200

PV
0 MODE
M:S SV
FIX000RPROG
Op
ration mode transfer

Three times
PV
0MATU
M:S SV
FIX000RPPID

PV
0MATU
M:S SV
FIX000RPPAT
PID control
Displays the
character “AT.”

Conduct AT.
2 seconds or more
The display goes to
the next parameter.
PV
0 BPS1
M:S SV
FIX00019200
Communication speed 1
PV
L0CPB $
M:S SV
FIX0000000.0
PV bias
Press the

key while
pressing the

key.
PV/SV monitor
PV
00028 $
M:S SV
5 30:00000200
PV
0 BPS1
M:S SV
FIX00038400
The display goes to
the next parameter.

Switches to
38400.


Several times
Displays the 38400