1. OUTLINE
IMR02L04-E3
1-14
Up key
Increase numerals. *
Press the Up key to set segment time in the Program control mode (RUN).
To scroll through numbers faster, press and hold the Up key. *
Down key
Decrease numerals. *
Press the DOWN key to turn back to the previous value when passing the segment time to be set in
the Program control mode. To scroll back through numbers faster, press and hold the DOWN key. *
Shift key
Shift digits when settings are changed.
Used to selection operation between modes.
Set (SET) key
Used for parameter calling up and set value registration.
Monitor key
Use to switch the monitor screen.
Pressing the
key while any screen other than the Monitor mode screen is being displayed returns
to the PV/SV monitor screen.
Loader communication connector
Designed to connect with W-BV-03 cable for loader communication (RKC product)
*
Continuously pressing the and the keys will accelerate number change.
The following acceleration settings may be changed by using communication:
Key accelerating speed setting [Communication identifier KV] **
Key acceleration speed Forward/Back-up [Communication identifier KW] **
** Refer to the PF900/PF901 Instruction Manual (IMR02L03-E) on the CD-ROM.
Side view
Input select switch
Use to switch Input groups of Measurement input. Set Voltage (low) input group, Voltage (high) input
group or Current input group. (Refer to P. 3-8)
Input select switch
To Next Page
Loading...
Need help?
General
