RKC INSTRUMENT PF900 User Manual

1. OUTLINE
IMR02L04-E3
1-3
1.3 Model Code
Check that the product received is correctly specified by referring to the following model code list:
If the product is not identical to the specifications, please contact RKC sales office or the agent.
 Suffix code
Specifications
Suffix code
Hardware coding only Quick start code1
PF900 (PV display: Green, SV display: Orange) (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
PF901 (PV and SV displays: White)

  


*
       /Y
Output 1 (OUT1)
1
Relay contact
M
Voltage pulse V
Voltage/Current [Refer to Output Code Table (P. 1-5)]

Triac T
Open collector D
Output 2 (OUT2)
1
None N
Relay contact M
Voltage pulse V
Voltage/Current [Refer to Output Code Table (P. 1-5)]

Triac T
Open collector D
Output 3 (OUT3)
1
None
N
Voltage pulse V
Voltage/Current [Refer to Output Code Table (P. 1-5)]

Open collector D
Power supply voltage
24 V AC/DC 3
100 to 240 V AC 4
Digital output
(DO1 to DO12)
2
4 points (DO1 to DO4) [Standard]
4
12 points (DO1 to DO12) C
CT input or Feedback
resistance input
None N
CT input (2 points)
T
Feedback resistance input
3
F
Communication
function
Digital input
(DI1 to DI6)
4
None
N
Communication 1 (RS-232C) and DI1 to DI6, No communication 2 1
Communication 1 (RS-422A) and DI1 to DI6, No communication 2 4
Communication 1 (RS-485) and DI1 to DI6, No communication 2 5
Communication 1 (RS-232C), Communication 2 (RS-485)
5
and DI1 to DI6 W
Communication 1 (RS-485), Communication 2 (RS-485)
5
and DI1 to DI6 X
Communication 1 (None), Communication 2 (RS-485)
5
and DI1 to DI6 Y
DI1 to DI6 D
Quick start code
No quick start code (Configured to factory set value)
6
N
Specify quick start code 1 1
Specify quick start code 1 and 2 (For Quick start code 2, refer to page 1-7) 2
Control Method
[Quick start code 1]
Quick start code 1 is not specified
No code
PID control with AT (Reverse action) F
PID control with AT (Direct action) D
Heat/Cool PID control with AT (Cooling gain linear type) G
Heat/Cool PID control with AT (for Extruder [air cooling]) A
Heat/Cool PID control with AT (for Extruder [water cooling]) W
Position proportioning PID control without FBR (Reverse action) Z
Position proportioning PID control without FBR (Direct action) C
Measured input and
Range
[Quick start code 1]
Quick start code 1 is not specified
No code
Refer to Range Code Table. (P.1-5, P. 1-6) 
Instrument specification Version symbol
Y
1
Some output types are not specifiable. Refer to the Output type availability on page 1-4.
2
The output type for DO1 to DO4 is Relay: for DO5 to DO12 is Open collector.
3
When Feedback resistance input is specified with other control method than Z or C, the factory set value is fixed to “Z: Position proportioning
PID control without FBR (Reverse action).”
4
Digital input 7 (DI7) to 11 (DI11) are standard.
5
Communication 2 is for the Intercontroller communication.
6
Set initial setting parameters in the Engineering mode. Refer to 4.5.5 Engineering mode (P.4-32) for description of the parameters.

RKC INSTRUMENT PF900 Specifications

General

Brand	RKC INSTRUMENT
Model	PF900
Category	Controller
Language	English