RKC INSTRUMENT PF900 - Page 22

1. OUTLINE
IMR02L04-E3
1-12
 SEG display [PF900: Green/PF901: White]
Displays segment number (from 1 to 99).
In the Reset mode (RESET):
Displays the segment number before running the operation.
In the Program control mode (RUN):
Displays the segment number in process.
In the Fixed set point control mode (FIX) or the Manual control mode (MAN):
Displays the segment being displays in the previous mode.
 PTN display [PF900: Green/PF901: White]
Displays program pattern number (from 1 to 99).
In the Reset mode (RESET):
Displays the Program pattern number being set.
In the Program control mode (RUN):
Displays the program pattern number in process.
In the Fixed set point control mode (FIX) or the Manual control mode (MAN):
Displays Program pattern number in the previous mode.
 TS lamp [PF900: Green/PF901: White]
Lights when Time signal output is turned on.
 AT lamp [PF900: Green/PF901: White]
Flashes during the Autotuning (including Autotuning with learning function).
(AT end: AT lamp turns off)
 TIME display [PF900: Orange/PF901: White]
Displays segment time or character of parameter.
 Time unit display [PF900: Green/PF901: White]
Displays time unit of Segment time. [hour (H): minute (M) or minute (M): second (S)]