Index-2
PowerFlex® 700L Liquid-Cooled Drive User Manual
Publication 20L-UM001D-EN-P
communication adapter information reference,
P-2
Communication File (700 Vector Control), 5-3
components for Frame 3A and 3B drives, 3-1
contactors - input/output, 1-9
control synchronization cable connections
Frame 2, 2-20
Frame 3A, 3-34
Frame 3B, 3-36
control terminal block wire sizes
Frame 2, 2-18
Frames 3A and 3B, 3-31
conventions used in this manual, P-3
coolant
biocide treatment, 4-8
connections to
Frame 2 drive or Frame 3A or 3B power
module, 4-10
Frame 3A or 3B complete drive, 4-11
corrosion inhibitor, 4-7
requirements, 4-7
cooling loop
application guidelines, 4-9
recommendations, 4-5
types, 4-1
C-Tick Conformity, 1-8
D
data nameplate locations
Frame 2, P-7
Frames 3A and 3B, P-8
DC bus capacitor discharge
Frame 2, 2-15
Frames 3A and 3B, 3-26
Decel Mask parameter (700 Vector Control), 5-3
Decel Owner parameter (700 Vector Control), 5-4
derating guidelines, A-4
Diagnostic Parameter Group (700 Vector
Control), 5-1
Direction Mask parameter (700 Vector Control),
5-3
Direction Owner parameter (700 Vector Control),
5-4
distribution systems - unbalanced, ungrounded
or resistive grounded, 1-2
Dowtherm, 4-7
DPI connections
for Frame 2 drives, 2-22
for Frame 3A and 3B drives, 3-37
DPI Port Sel parameter (700 Vector Control), 5-3
drive
components for Frames 3A and 3B, 3-1
cover - removing (Frame 2), 2-7
derating guidelines, A-4
door filter replacement on input filter cabinet
(Frames 3A and 3B), 6-7
enclosure ratings, 1-1
grounding
Frame 2, 2-11
Frames 3A and 3B, 3-22
lifting
Frame 2, 2-3
Frames 3A and 3B, 3-8
power watts loss rating, A-6
Drive Alarm 1 parameter (700 Vector Control),
5-1
drive lifting instructions
Frame 2, 2-4
Frame 3A and 3B complete drives, 3-9
E
earthing, see grounding
Electrostatic Discharge (ESD), P-4
enclosure ratings for drive, 1-1
equipment lifting
Frame 2, 2-3
Frames 3A and 3B, 3-8
external door-mounted HIM connection
(optional)
Frame 2, 2-22
Frames 3A and 3B, 3-39
F
fault
clearing, 6-3
descriptions
700 Vector Control, 6-4
700S Phase II Control, 6-5
Fault Clr Mask parameter (700 Vector Control),
5-3
Fault Clr Owner parameter (700 Vector Control),
5-4