Rohde & Schwarz EMI Test ReceiverESCI - Page 157

R&S ESCI Receiver – MEAS Key
1166.6004.12 4.25 E-2
FINAL MEAS menu (left side menu)
EDIT PEAK
LIST
PEAK
SEARCH
NO OF
PEAKS
RUN FINAL
MEAS
INTER
ACTIVE
AUTOMATIC
FINAL
FINAL
MEAS TIME
PEAKS
SUBRANGES
MARGIN
The PEAK SEARCH softkey starts the determination of the subrange
maxima list from the available scan results. The procedure can be repeated
as often as desired to try out different settings of margin and number of
subranges.
IEC/IEEE-bus command :CALC:PEAK
The following table shows the peak list which is determined by the peak-search function after the
prescan:
Trace1: 014QP
EDIT PEAK LIST (Prescan results)
FREQUENCY
LEVEL dBpT
1 Average
2 Average
1 Max Peak
2 Average
1 Max Peak
2 Average
1 Max Peak
2 Average
1 Max Peak
2 Average
1 Max Peak
2 Average
2 Average
2 Average
2 Average
1 Max Peak
2 Average
1 Max Peak
2 Average
2 Average
TRACE3: ---
Trace2: 014AV
DELTA LIMIT dB
80.0000 MHz
89.4800 MHz
98.5200 MHz
98.5200 MHz
100.7200 MHz
102.3200 MHz
113.2400 MHz
116.9200 MHz
125.8800 MHz
125.8800 MHz
138.4800 MHz
138.4800 MHz
144.0400 MHz
167.0400 MHz
176.2400 MHz
200.4800 MHz
200.4800 MHz
210.2800 MHz
226.5600 MHz
239.0000 MHz
35.34
38.83
47.53
46.63
54.14
50.89
49.68
44.81
55.01
53.55
45.68
42.17
43.72
44.77
45.52
52.49
48.76
60.55
59.02
48.59
-3.91
-0.91
-2.63
6.47
3.88
10.56
-1.08
3.91
3.78
12.33
-5.95
0.53
1.90
2.32
2.83
-0.75
5.51
7.09
15.24
4.75
TRACE