R&S ESCI Limit Lines
1166.6004.12 4.183 E-1
Selection of Limit Lines
The LINES key opens the menu for fixing the limit lines and the display lines.
LINES menu
LINES
The SELECTED LIMIT LINE display field provides information concerning the characteristics of the
marked limit lines.
In the LIMIT LINES table, the limit lines compatible to the settings of the active screen can be enabled.
New limit lines can be specified and edited in the NEW LIMIT LINE and EDIT LIMIT LINE sub-menus,
respectively.
The horizontal and vertical lines of the DISPLAY LINES submenu mark individual levels or frequencies
(span > 0) or times (span = 0) in the diagram.
To Next Page
Loading...
