Measurement Documentation R&S ESCI
1166.6004.12 4.258 E-1
Selecting Printer, Clipboard and File Formats
DEVICE
SETUP
The DEVICE SETUP softkey opens the selection dialog for file format and
printer.
Navigation in the dialog is possible by turning the spinwheel; selection of an
item is confirmed by pressing the spinwheel or the ENTER key.
The dialog is closed with ESC (alternatively, the Close button can be selected
with the spinwheel and the dialog can be closed by pressing the spinwheel or
with ENTER).
File formats
A file format is selected by turning the spinwheel and then confirmed by pressing the spinwheel or
the ENTER key.
The following file formats can be selected:
BITMAP BMP format (non-compressed)
WINDOWS METAFILE Vector format, supported as of Windows 3.1
ENHANCED METAFILE Vector format, supported as of Windows 95/98/ME/NT/XP
When a file format is selected, printing to a file is automatic. The file name is queried when the PRINT
SCREEN, PRINT TRACE and PRINT TABLE softkeys are pressed.
Clipboard
A clipboard is also selected with the spinwheel and then confirmed by pressing the spinwheel or
ENTER key.
After the PRINT SCREEN, PRINT TRACE or PRINT TABLE softkey has been pressed, printout is
routed to the clipboard. With the aid of the "Process - Insert" function, the information in the clipboard
can then be pasted into other programs, e.g. Paint, and subsequently processed.
To Next Page
Loading...
