Menu Overview R&S ESCI
1166.6004.12 3.28 E-1
Menu Overview
The following section gives a graphical overview of the R&S ESCI menus. Side menus are marked by
an arrow directed to the left/right, submenus by an arrow showing upwards.
The menus appear in the order corresponding to the arrangement of keys on the front panel. The
available hotkeys and the LOCAL menu appearing during the remote control of the instrument are also
displayed.
The functions of menus are described in detail in Chapter 4. The IEC/IEEE-bus command associated
with each softkey is indicated. In addition, the softkey list at the of Chapter 6 gives the assignment of
IEC/IEEE-bus commands to softkeys.
FREQ Key
START
RECEIVER
FREQUENCY
STOP
STEPSIZE
FREQ
AUTO
FINE
STEPSIZE
MANUAL
AUTO
COARSE
STEPSIZE
= FREQ
Receiver
CENTER
START
STOP
FREQUENCY
OFFSET
CF-
STEPSIZE
0.1*SPAN
0.5*SPAN
x * SPAN
= CENTER
= MARKER
0.1 * RBW
0.5 * RBW
x * RBW
= CENTER
= MARKER
Span <> 0 Span = 0
SIGNAL
TRACK
MANUAL
MANUAL
TRACK
BW
TRACK
THRESHOLD
TRACK
ON OFF
SELECT
TRACE
Analyzer
.
.
.
.
.
.
To Next Page
Loading...
