Connecting a Printer R&S ESCI
1166.6004.12 1.26 E-1
Local Printer
In the following example, a Star LC24 printer is connected to the LPT1 interface and configured as
DEVICE2 for hardcopies of screen contents. The Add Printer Wizard has already been opened as
described in the section "Starting the Add Printer Wizard" .
! To select the USB interface, open the list
of ports by clicking the spinwheel.
Select the printer port with
spinwheel/arrow keys and confirm by
pressing the spinwheel. The selection list
is closed again.
! To select the LPT connector, the selection
list need not be opened.
! Place the cursor on the Next button and
confirm by pressing the spinwheel.
The "Install Printer Software" dialog is
opened.
! Select the desired manufacturer ("Star") in
the Manufacturer table using the up / down
keys.
To Next Page
Loading...
