R&S ESCI Measurement Documentation
1166.6004.12 4.269 E-1
! Select the OK button with the spinwheel
and press the spinwheel to confirm.
The installation is completed.
Finally the instrument must be configured for printouts of the measurement screen with this printer. For
details please refer to the DEVICE SETUP softkey in the hardcopy menu.
Network Printer
Note: For easy operation of the subsequent dialogs, connection of a PS/2 keyboard with trackball
to the front panel is recommended. If no trackball is available, a USB mouse should be
connected additionally to the rear panel (see section "Connecting a Mouse" and
"Connecting a Keyboard")
In the example below, a HP Laserjet 5 printer is installed as network printer. The Add Printer Wizard has
already been opened as described in section " Starting the Add Printer Wizard "
! To select a network printer, click the
option "A network printer or a printer
attached to another computer".
Continue with Next.
To Next Page
Loading...
