Rohde & Schwarz EMI Test ReceiverESCI - Measurement of a Peak List

R&S ESCI Analyzer - MKR FCTN
1166.6004.12 4.133 E-1
Measurement of a Peak List
Menu MKR FCTN:
PEAK
LIST
NEW
SEARCH
SORT MODE
FREQ LEVEL
PEAK
EXCURSION
LEFT
LIMIT
RIGHT
LIMIT
THRESHOLD
PEAK LIST
OFF
The PEAK LIST softkey allows the peak values of the trace to be
determined and entered in a list with 50 entries max. The order of
the entries is defined by the SORT MODE:
FREQ sorting in ascending order of frequency values
(see screenshot); if span = 0, the entries are
sorted in ascending order of time values
LEVEL sorting according to level
The search range can be restricted by means of the LEFT LIMIT,
RIGHT LIMIT and THRESHOLD softkeys. The definition of the
peak values can be modified using the PEAK EXCURSION softkey.
The MKR->TRACE softkey in the main menu is used to select the
trace for searching peak values.
Opening the list performs a single search at the end of the sweep.
The NEW SEARCH softkey triggers a new sweep, determines the
peak values of the trace at the end of the sweep and enters them in
the list.
Use the PEAK LIST OFF key to delete the list from the screen.
IEC/IEEE-bus commands: INIT:CONT OFF;
CALC:MARK:TRAC 1;
CALC:MARK:FUNC:FPE:SORT X;
INIT;*WAI;
CALC:MARK:FUNC:FPE 10;
CALC:MARK:FUNC:FPE:COUN?;
CALC:MARK:FUNC:FPE:Y?;
CALC:MARK:FUNC:FPE:X?