R&S ESCI Setting Parameters
1166.6004.12 3.21 E-1
Entry of Alphanumeric Parameter
A help-line editor or an external keyboard (optional) are provided for the entry of alphanumeric
instrument parameters.
The spinwheel and the exponent key have no function with alphanumeric entry. All unit keys assume the
function of an ENTER key.
The entry is always made in a data entry window which is displayed automatically upon selection of the
parameter. The editing line comprises 60 characters. Up to 256 characters may be entered. If a text
exceeds 60 characters the contents is shifted automatically 20 characters left or right when the left or
right margin of the editing line is touched by the cursor.
Editing with External Keyboard
COMMENT CHANNEL
DPASS-FILTER TEST 23A
input lin
message line
Entry of text ! Select parameter.
The data entry is active automatically upon calling the
data entry window. The cursor is positioned at the
beginning of the previous entry.
! Press the required character on the keyboard.
The character is inserted prior to the cursor.
! Enter further characters
Correcting the entry ! Delete the entry using the DELETE key or
BACKSPACE key.
Terminating the entry
! Press the ENTER key of the external keyboard
The data entry window is closed and the new value is
accepted for the instrument.
Aborting the entry ! Press the ESC key on the front panel
or
! any softkey.
The data entry window is closed, the original value is
retained.
To Next Page
Loading...
