Setting Parameters R&S ESCI
1166.6004.12 3.20 E-1
Restoring the original value
! Press the BACK key
For numerous parameters, the data administration of
the instrument stores the previously valid parameter
value in addition to the current value. The BACK key
can be used to toggle between these two values. This
applies for terminated entries as long as the data entry
window is displayed.
Aborting the entry ! Press ESC key
The original parameter value is restored. The new
entry is deleted.
! Press ESC key again
The entry window is closed, the original value remains
active.
or
! Press any key or any softkey (even the softkey which
has opened the entry window).
The entry is aborted and the entry window is closed.
The original value remains active.
To Next Page
Loading...
