Installing Windows XP Software R&S ESCI
1166.6004.12 1.34 E-1
Installing Windows XP Software
Authorized Windows XP Software for the Instrument
The driver software and the system settings of Windows XP are adapted to the measurement functions
of the instrument. Correct operation of the instrument can therefore be guaranteed only if the software
and hardware used are authorized or supplied by Rohde & Schwarz.
The following program packages have been successfully tested for compatibility with the instrument's
software:
• R&S FS-K3 – software for measuring noise factor and gain
• R&S FS-K4 – software for measuring phase noise
• R&S Power Viewer
(virtual power sensor for displaying the results of Power Sensors NRP-Z11 and -Z21)
• Windows XP remote desktop
• FileShredder – for deleting files from the hard disk
• Symantec Norton AntiVirus – software for protection against viruses
The use of other software or hardware may cause failures in the functions of the R&S ESCI.
A current list of the software authorized for use on the R&S ESCI can be obtained from your nearest
Rohde & Schwarz agency (see list of addresses).
To Next Page
Loading...
