R&S ESCI Analyzer - MKR ->
1166.6004.12 4.137 E-1
Change of Settings via Markers – MKR ⇒
⇒⇒
⇒ Key
The MKR → menu offers functions through which instrument parameters can be changed with the aid of
the currently active marker. The functions can be used on markers and delta markers.
On opening the menu, the entry for the last active marker is activated; if no marker was enabled,
MARKER 1 is activated and a peak search is performed.
MKR
menu
NEXT PEAK
REF LEVEL
=MKR LVL
PEAK
EXCURSION
MKR
MKR
SELECT
MARKER
CENTER
=MKR FREQ
SEARCH
LIMITS
MRK->TRACE
AMPL
SPAN
PEAK
MIN
NEXT MIN
RIGHT
FCTN
MKR -> CF
STEPSIZE
EXCLUDE
LO
RIGHT
LIMIT
LEFT
LIMIT
THRESHOLD
SEARCH LIM
OFF
NEXT PEAK
LEFT
NEXT PEAK
RIGHT
NEXT MIN
LEFT
SELECT
MARKER
The SELECT MARKER softkey activates the numerical selection of the
marker in the data entry field. Delta marker 1 is selected by input of ' 0 '.
IEC/IEEE-bus commands: CALC:MARK1 ON;
CALC:MARK1:X <value>;
CALC:MARK1:Y?
To Next Page
Loading...
