LAN Interface R&S ESCI
1166.6004.12 4.316 E-1
Defining Users
After the network driver software has been installed, the instrument will output an error message on the
next power-on, as there is no user called "Instrument" (= user name for XP autologin) in the network. It
is therefore necessary to define a common user for Windows XP, to adapt the password to the network
password and the network and to disable the autologin mechanism subsequently.
The definition of new users in the network is done by the network administrator. For definition of a new
user on the instrument, the User Account Assistant is required:
! Call up the Windows XP start menu
using the Windows key or the key
combination <CTRL> <ESC>.
! Then click "Settings", "Control Panel"
and "User Accounts" one after the
other.
The User Accounts wizard with the Pick
a task... dialog will be opened.
! Select "Create a new account" .
The dialog to enter a new user name
will be opened.
To Next Page
Loading...
