Connecting an External Monitor R&S ESCI
1166.6004.12 1.20 E-1
Connecting an External Monitor
Caution:
The monitor may only be connected when the instrument is switched off (STANDBY).
Otherwise, the monitor may be damaged.
Do not modify the screen driver (display type) and display configuration since this will
severely affect instrument operation.
The instrument is equipped with a rear-panel MONITOR connector for the connection of an external
monitor.
MONITOR
After connecting the external monitor the instrument needs to be rebooted in order to recognize the
monitor. After that the measurement screen is displayed on both the external monitor and the
instrument. Further settings are not necessary.
To Next Page
Loading...
