R&S ESCI Measurement Documentation
1166.6004.12 4.259 E-1
Printer
A printer (also a preconfigured network printer) is selected by selecting Printer with the spinwheel
and then confirmed by pressing the spinwheel or the ENTER key.
After confirmation, the entries under Name, Print to File and Orientation are available for selection with
the spinwheel.
To select the printer type, select Name and open the selection list by pressing the spinwheel or ENTER.
Select the desired printer (in the example "Cannon Bubble-Jet BJC800 (A4") from the list by means of
the spinwheel and confirm by pressing the spinwheel or ENTER. This closes the list and the cursor is
placed on the Name field again.
Printing to a file is also possible. In this case select Print to File with the spinwheel and activate or
deactivate the associated list by pressing the spinwheel or the ENTER key.
The printing format is selected under Orientation. In this case, too, pressing the spinwheel or ENTER
opens the selection list.
To Next Page
Loading...
